home *** CD-ROM | disk | FTP | other *** search
- PIBTERM is another terminal that will work with CONDOR.SYS
- and the version I tested it on is from 1987! Gee see
- how hard it would be for those big gun terms to support
- CONDOR?! Give me a break!
-
- PIBTERM can be downloaded from The UNKNOWN SYSTEM 205-534-8532 v.32bis
-
-
-
- How to get CONDOR.SYS to work with PIBTERM:
-
-
- 1. Install CONDOR.SYS put a line like
- device=condor.sys
- in your config.sys file and delete any other
- line in the config.sys that loads any other
- ansi.sys then reboot.
-
- 2. Configure PIBTERM to 8 data bits, NO parity,
- and 1 stop bit.
-
- 3. From PIBTERM type ALT-P select terminal emulation
- then set terminal type to DUMB, in that same menu set
- also option 'm' DOS console output to YES.
- Hit esc and select WRITE settings to disk.
- You might want to rerun PIBTERM to make sure the
- settings load in.
-
- 4. Doesn't work? Just double check the settings and make sure
- they are what I said. I tried this with PIBTERM402.
- It may have some minor problems because of the screen
- mode switching, I'm hoping it won't be to bad,
- I only tested Condor with PIBTerm for a short while.
- If you don't like PIBTerm you might want to try
- COM-AND or BIG103, RCOMM and IL tsr terms work with CONDOR too.